Heating Products
Electric Underfloor Heating Systems
Warmup PLC is the UK’s leading manufacturer of underfloor electric heating products, having sold over 250,000 heaters in the UK alone. Warmup PLC track record guarantees that you get the best floor heating products available, backed by their support team.
Used either as primary heating or simply as floor heat to keep the chill off, Warmup Under Tile Heating is inexpensive, easy to install and comes with a Lifetime Warranty.
Warmup's home heating systems can be installed in hours without the need for specialist tools or skills. Our SafetyNet Guarantee covers underfloor heating installation errors for complete peace-of-mind!
|
|
|
|
Matting System Installation |
|
|
||
|
Loose Wire System
We design our systems using a 3mm, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.
There is no need to dig up the floor and no need to mix concrete. Simply fix our heating element to the subfloor, tile straight over and say goodbye to cold feet for good!
Insulation Board
WRMUP INSULATION BOARD is a water resistant insulated tile backer board made of extruded polystyrene, faced on both sides with a fibreglass mesh embedded into a thin cement polymer mortar.
These can be used as a structural tile backer board in the floor. It will withstand a load of 30 tonnes per square metre and is ideal for use with underfloor heating as it pushes the heat into the room, by not allowing heat to penetrate down into the concrete substrate below. As a wall tile backer board, tiles can be fixed directly on to the surface without prior preparation and, being totally waterproof, which is ideal for use in bathrooms or showers.
Warmup Insulation Boards will save you money when used in conjunction with undertile heating by acting as a very efficient thermal barrier. It reflects the heat upwards into the floor tile instead of allowing heat to warm up the concrete slab below. By using Warmup Insulation Board you will find that after switching on your heating, your floor tiles will warm up in about 10-15 minutes. Without insulation boards it could take anything from 2-3 hours, or more.
